Gretsch-Unitas

Special Order Lock - Delivery approx 3 WeeksBackset: 25mm Faceplate: 24m x 3mm x 160mm Flat Stainless Steel..

According to DIN 18250, approved for fire protection doors according to DIN 4102 and in combination with BKS fittings for fire protection closures according to DIN EN 1634, stainless steel faceplate, angular, with change, galvanized lock boxes, with easy mounting of the cylinder fastening screw Spec..

Shootbolt attachment from GU to suit GU multipoint locks. This 160mm long shootbolt is available with standard or reverse action. To suit GU multipoint locks Shootbolt attachment Length: 160mm Width: 16mm Choose between reverse or standard actionReverse ac..

1 Piece latch, deadbolt, 2 hooks and 2 rollers mechanismBackset: 30 or 35mmCentres: 92mmFaceplate: 16mm..

Single Spindle Latch, Deadbolt & 2 RoolersLatch Reversal: Push flat bladed screwdriver into small rectangular slot above spindle and pull latch out at the same timeVersions Available:28mm Backset - 92mm Centres - 16mm Flat Faceplate - 8mm Spindle - Case..

Shootbolt attachments by GU to suit the GU 3000 ProLock Slave multipoint lock system. To suit GU ProLock Slave multipoint lock Shootbolt attachment Sold as a pairFREE UK DELIVERY..

Shootbolt keep by GU to suit the GU 3000 ProLock Slave multipoint lock system. To suit GU ProLock Slave multipoint lock Shootbolt keep Single or Double..

Full length keep by GU to suit the GU 3000 ProLock Long multipoint lock system. Available both left and right handed. To suit GU ProLock Long multipoint lock Full length keep..

The GU 3000 ProLock Long is a lever operated multipoint lock system with a 35mm backset, 92/62 centres, a 16mm wide faceplate, 2 hooks and 4 rollers. It can be operated by lifting the lever to engage the locking mechanisms and turning the cylinder fully, thus locking the unit. One full turn of the k..

The GU 3000 ProLock Short & Slave are lever operated multipoint lock systems. It can be operated by lifting the lever to engage the locking mechanisms and turning the cylinder fully, thus locking the unit. One full turn of the key followed by a downward push of the lever will unlock the system w..

Full length keep by GU to suit the GU 3000 ProLock Short multipoint lock system. Available both left and right handed. To suit GU ProLock Short multipoint lock Full length keep Faceplate Width: 30.5mm Length:    1376mm..

This lever operated latch & deadbolt multipoint lock from GU features a Euro profile lock case, a single spindle, a 16mm wide faceplate and 4 additional roller locking pointsBacksets Available - 28mm 35mm 40mm & 45mm  (measure from face to centre of spindle hole) Spindle c..